Guangdong, China (Mainland), Guangdong China (Mainland)
Double Components Adhesives
Main Raw Material:
Artificial Stone,Cartridge Gun
Artificial Stone Type:
For bonding solid surface material
high bond strength
two smart nozzles
500000 Set/Sets per Week
Packaging & Delivery
Standard export packing the sheets surface will be protected by the chipboard, reinforce sheets with stell strip.
in 3-5 days afetr we get your confirmed order
50ml 250ml Artificial Stone Adhesives/Corian Sheet Seamless Joint Adhesives High Quality With Factory Price
Spec.: 50ml 75ml 250ml is available here
Applicable materials: Pure Acrylic Board, composite acrylic board and unsaturated polyester board.
Applicable color: differentiation coloring.
Coating length: 9m.
Cartridge Material: PBT.
Products advantage: High effective, time-saving, professional, stable and environmental.
Disadvantage: Higher cost
The main advantages of our adhesives are as follows:
•Fast Room Temperature Curing
•Water Penetration Resistant
Shelf Time: If you use our PBT cartridge packing, shelf time can be at least 12 month.
Curing Time: Our curing time is very stable, within 12 months, curing time will be the same. It is around 20min at 21°C.
Bending Strength: After joint, The bending strength can reach 35.5Mpa, which is better than Corian, and the same with Staron, LG.
Yellowing: Our white glue will no yellowing for more than 10 years after joint with the solid surface, no yellowing.
1. Please read the directions on the outer package of the products carefully before use. 2. Remove the cover and unplug, clean up the blockage if there is any. Please make sure that glue A and glue B flow out at the same time before you put the mixer. Only after the mixer is put and fixed to the glue gun, can you begin to apply the glue. In order to ensure the good quality of the glue, please note: Do discard some glue in the quantity of the similar length to the mixer when change a new mixer and make sure to accomplish gluing within hardening period (8 minutes). 3. Please change a new mixer when the pausing time is more than 8 minutes during the gluing. 4. Wear protective glasses, mask and gloves while using glue to avoid inhaling vapor. Please operate in ventilation area. 5. In case that the working temperature is 10°Cbelow, you can adopt the regional heating method (but the temperature should not be above 30°C ). For example, use the coal to heating in the factory, or use the electric fan or sunlamp to heating at site (Should not be too near to the glue. The electric fan should be 1m far way while the sunlamp should be 3m far way at least). 6. For other information, please refer to the products manual and security documents (or refer to the operation directions—attached, or ask the manufacturer for video images).
The seamless glue for artificial stone is the flammable chemical. Please avoid contact with the skin directly. In case of contact with the eyes, please immediately wash with large amount of clean water for 15 minutes. Wash thoroughly with soap and water after skin contacting. If inhaled, move the suffered one to a place with fresh air , in case swallowed, induce vomiting, and call a physician immediately.