Guangdong, China (Mainland), Guangdong China (Mainland)
Double Components Adhesives
Main Raw Material:
Polyurethane, Methly Methacrylate
Artificial Stone,Cartridge Gun
Artificial Stone Type:
For bonding solid surface material
two mixer is available
in 2 days
500000 Set/Sets per Week
Packaging & Delivery
Standard export packing the sheets surface will be protected by the chipboard, reinforce sheets with stell strip.
in 3-5 days afetr we get your confirmed order
solid surface adhesives for Pure Acrylic Composite Sheets
Applicable materials: Pure Acrylic Board, composite acrylic board and unsaturated polyester board.
Applicable color: differentiation coloring.
Coating length: 9m.
Cartridge Material: PBT. P
roducts advantage: High effective, time-saving, professional, stable and environmental.
Disadvantage: Higher cost
Products Picture and Features:
1.Strong bond performance
CHMA600 adhesive exhibits superior bond strength on acrylic solid surface.
2.Faster cure at room-temperature
It features a working time of 8-13minutes, cure time of 20-25 minutes and can be sanded after 25minutes.
3.Create seamless joints
Advanced bonding strength and various surfacing colors assist the fabricators to produce virtuallly invisible joints on bonded surface.
4.Custom colors available
Extensive colors available and all brands of acrylic solid surfaces colors can be designed and formulated.
It is UV stable and enronmental friendly for all articles are comply with European Commission Directive. It has excellent resistance to wear, impact, water, oil and high temperature.
6.Supplied in ready-to-dispense cartridges
50ml dual cartridge&two mixing tips /per set
235ml dual cartridge&two mixing tips/per set
7.Reduce labor and time with dispensing accossies
Manual applicator gun & Motionless mixing tip
8.Long shelf life
It can be stored for one year from shipment day.
9.Provide adhesives for private label customers
The Glue Gun:
Solid Surface Adhesives
Handguns are very convenient and are desired in most situations, These are high quality professional tools that will provide years of service
1. Please read the directions on the outer package of the products carefully before use. 2. Remove the cover and unplug, clean up the blockage if there is any. Please make sure that glue A and glue B flow out at the same time before you put the mixer. Only after the mixer is put and fixed to the glue gun, can you begin to apply the glue. In order to ensure the good quality of the glue, please note: Do discard some glue in the quantity of the similar length to the mixer when change a new mixer and make sure to accomplish gluing within hardening period (8 minutes). 3. Please change a new mixer when the pausing time is more than 8 minutes during the gluing. 4. Wear protective glasses, mask and gloves while using glue to avoid inhaling vapor. Please operate in ventilation area. 5. In case that the working temperature is 10°Cbelow, you can adopt the regional heating method (but the temperature should not be above 30°C ). For example, use the coal to heating in the factory, or use the electric fan or sunlamp to heating at site (Should not be too near to the glue. The electric fan should be 1m far way while the sunlamp should be 3m far way at least). 6. For other information, please refer to the products manual and security documents (or refer to the operation directions—attached, or ask the manufacturer for video images).
The seamless glue for artificial stone is the flammable chemical. Please avoid contact with the skin directly. In case of contact with the eyes, please immediately wash with large amount of clean water for 15 minutes. Wash thoroughly with soap and water after skin contacting. If inhaled, move the suffered one to a place with fresh air , in case swallowed, induce vomiting, and call a physician immediately.